ESC "&" <0> n1 n2 [m0 m1 ... m5 m6 m7 m8 m9] n2 - n1 + 1
[Function] Defining the Download character set
[Code] <1B>H <26>H <00>H n1 n2 [m0 m1 ... m5 m6 m7 m8 m9] n2 - n1 + 1
[Range] 32 ≤ n1 ≤ n2 ≤ 255 m0 = 0 or m0 = 128
[Outline] This command defines he download characters. n1 is a character code to start definition and
n2 is to end definition, respectively. When defining only one character, set n1 = n2. You can
define the ASCII codes ranging from 32 to 255. Once the download characters are defined,
they remain valid until they are redefined or the download deletion command (ESC DC2 n1
n2) is executed.
To Next Page
Loading...
