Details
ESC "R" n
[Function] Selecting the international character set
[Code] <1B>H <52>H n
[Range] 0 ≤ n ≤ 10
[Outline] This command selects the international characters according to the value of n.
n Character Set n Character Set
0 U.S.A. 6 Italy
1 France 7 Spain
2 Germany 8 Japan
3 U.K. 9 Norway
4 Denmark I 10 Denmark II
5 Sweden
[Default] Depends upon DIP switch setting.
SO
[Function] Specifying the double width character
[Code] <0E>H
[Outline] The data following this command is printed doubled in the horizontal direction. Double
width characters remain valid until the double width character cancel command is entered,
but they are also cancelled after they are printed one line. Note that the double width
characters take up two ordinary characters worth of width.
To Next Page
Loading...
