Citizen J290 - Page 47

47
Checking and correcting the reference position
4
Press and release the upper left button
.
Each time you press the button, the hand moves by 1 step.
•The hand moves continuously while you are pressing and holding the button.
5
Press and release the lower left button
to change the hand to be
corrected.
Each time you press and release the lower left button
, the target hand moves
slightly to indicate it is adjustable.
•The target hand changes in the following order: 1 000 ft hand (compass
hand) → 25 ft hand → 10 000 ft hand → (back to the beginning)
6
Repeat steps 4 and 5 to correct the reference positions of all the hands.
7
Push the crown in to position
to finish the procedure.