- Eng 17 -
English
MEASURING YOUR BLOOD PRESSURE
• Plug the air hose connector fi rmly
into the air hose socket on the
main unit, as illustrated.
Plug the air hose
connector into the main
unit.
Place the cuff at the height of the heart.
( See page 20)
2
3
Air hose socketAir hose connector
Press the START/STOP switch (the blue switch).
4
* If the pressurization value exceeds 280mmHg, if pressurization feels
abnormal, or if you want to stop the measurement process, press the
START/STOP switch again. The cuff defl ates, and the power turns off.
• All digits displayed is an initial display, indicating that the monitor is
functioning normal.
• The cuff is pressurized automatically.
* If the unit judges that pressurization is insuffi cient, it automatically
repressurizes.
* is displayed when a pulse is detected.
* When you want to stop measurement, press the
“START/STOP” switch. The cuff is defl ated and
measurement stops.
To Next Page
Loading...
