114
Driving
The loss of pressure detected does not
always cause visible bulging of the tyre.
Do not satisfy yourself with just a visual
check.
F
If you have a compressor, such as the one
in the temporary puncture repair kit, check
the pressures of the four tyres when cold.
F
If it is not possible to make this check
immediately, drive carefully at reduced
speed.
or
F In case of a puncture, use the temporary tyre
repair kit or the spare wheel (depending on
equipment).
The alert is kept active until the system is
reinitialised.
Reinitialisation
The system must be reinitialised after any
adjustment to the pressures of one or more
tyres, and after changing one or more wheels.
Before reinitialising the system, ensure
that the pressures of the four tyres are
correct for the use of the vehicle and in
line with the recommendations on the tyre
pressure label.
The under-inflation alert can only be relied
on if the system has been reinitialised
with all four tyres inflated to the correct
pressures.
The under-inflation detection system
does not give a warning if a pressure is
incorrect at the time of reinitialisation.
The system must be reinitialised with the
ignition on and the vehicle stationary:
- in the vehicle configuration menu for
vehicles fitted with a display screen,
- via the button on the dashboard for vehicles
without a screen.
Screen A
F Press the MENU button for access to the
main menu.
F Press the "5" or "6" button to select the
"Veh config" menu, then confirm by
pressing the OK button.
F
Press the "5" or "6" button to select the
"Reinit inflat" menu, then confirm by
pressing the OK button.
A message is displayed to confirm the request.
F Confirm by pressing the OK button.
Screen C
F Press the MENU button to access the main
menu.
F Press the "5" or "6" button to select the
"Personalisation-configuration" menu,
then confirm by pressing the OK button.
F
Press the "5" or "6" button to select the
"Define the vehicle parameters" menu,
then confirm by pressing the OK button.
F
Press the "5" or "6" button to select
the "Tyre pressures" menu, then the
"Reinitialisation" menu, then confirm
by pressing the OK button. A message
confirms the reinitialisation.
Touch screen tablet
F Press the MENU button.
F
Select the "Driving" menu.
F
In the secondary page, select " Under-
inflation initialisation".
A message is displayed to confirm the
reinitialisation request.
F Select "Yes" or "No", then confirm.
A message confirms the reinitialisation.
https://www.automotive-manuals.net/
To Next Page
Loading...
