130
Practical information
Removable snow shield
plug
Depending on country, the removable snow
shield plug is installed on the lower part of the
front bumper, to avoid the accumulation of
snow at the radiator cooling fan.
Do not forget to remove the removable
snow shield plug when the exterior
temperature is higher than 10°C (no risk of
snowfall) or if you are towing.
Fitting
F Put the removable snow shield in front of its
centring pin A on the front bumper.
F Fit it in place by pressing every clip B at the
four corners.
Removal
F Place a screwdriver at the hole near each
clip.
F Make a lever movement to unclip the four
clips B.
Changing a wiper blade
Putting the windscreen
wiper blades in the special
position
Changing a windscreen
wiper blade
F Within one minute after switching off
the ignition, move the wiper stalk down
to position the wiper blades along the
windscreen pillars (special position).
https://www.automotive-manuals.net/
To Next Page
Loading...
Need help?
General
