EasyManua.ls Logo

CITROEN BERLINGO MULTISPACE - Changing a Fuse

CITROEN BERLINGO MULTISPACE
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
154
In the event of a breakdown
Third brake lamp
Type A, W16W – 16W
F Unscrew the two nuts.
F
Push the pins.
F
If necessary, disconnect the connector to
remove the lamp.
F Change the bulb.
Changing a fuse
The fuse boxes are located:
Professional repairers: for complete
information on the fuses and relays,
consult the wiring information and
diagrams available through the dealer
network.
Removing and fitting a fuse
Good Failed
CITROËN accepts no responsibility for the
cost incurred in repairing your vehicle or
for rectifying malfunctions resulting from
the installation of accessories not supplied
or not recommended by CITROËN and
not installed in accordance with the
specifications, in particular when the
combined power consumption of all of the
additional equipment connected exceeds
10
milliamperes.
-
in the lower dashboard on the left-hand side
(behind the cover).
- under the bonnet (near the battery).
If fitted on your vehicle, an
additional fuse box is provided
for towing, the towbar and the
connections for body and platform
cab conversions. It is located on
the right-hand side behind the
load stop partition.
The information given concerns only those
fuses which can be changed by the user using
the tweezers located behind the dashboard
open storage compartment on the right-hand
side. For any other work, visit a CITROËN
dealer or a qualified workshop.
Before changing a fuse, the cause of the fault
must be found and rectified.
F
Use the tweezers.
Always replace a faulty fuse with a fuse of
the same rating.
https://www.automotive-manuals.net/

Related product manuals