142
Practical information
Procedure
Before topping up, ensure that the vehicle is
parked on a flat and level surface.
In wintry conditions, ensure that the
temperature of the vehicle is above -11°C.
Otherwise the AdBlue
®
may be frozen and
so cannot be poured into its tank. Park your
vehicle in a warmer area for a few hours to
allow the top up to be carried out.
F
Obtain an AdBlue
®
container or bottle. After
first checking the use-by date, read the
instructions on the label carefully before
pouring the contents of the container or
bottle into your vehicle's AdBlue tank.
Or
F
Insert the AdBlue
®
pump nozzle and refill
the tank until the nozzle stops automatically.
Important:
-
To avoid overflowing the AdBlue
®
tank,
it is recommended:
• To do a top up of between 10 and
13
litres using the AdBlue
®
bottle.
Or
• That you stop after the nozzle’s first
automatic stop if you are refilling at a
service station.
-
If your vehicle's AdBlue
®
tank is
completely empty – which is confirmed
by the alert messages and the
impossibility of starting the engine –
you must add at least 5
litres.
Once the AdBlue tank has been filled
after a breakdown due to running out
of AdBlue, you must wait for at least
5
minutes before switching on the
ignition, opening the driver's door,
unlocking the vehicle or inserting the
key in the switch.
Switch on the ignition, then after a
minimum of 10
seconds, start the engine.
F
With the vehicle unlocked, open the fuel
filler flap; the blue filler cap for the AdBlue
®
tank is located to the left of the black fuel
filler cap.
F
Turn the blue cap 1/6
th
of a turn anti-
clockwise.
F Remove the blue cap.
https://www.automotive-manuals.net/
To Next Page
Loading...
Need help?
General
