Your Navidrive system will be subject to
phenomena not encountered by your equip-
ment you have at home. The reception of AM
and FM signals may suffer from interference,
which is caused by the nature and propaga-
tion of the signals and does not refl ect on the
quality of your radio installation.
In AM, the reception may be affected when
passing under power lines or bridges, or
when travelling through tunnels.
In FM mode, the reception may be affected by
the distance from the station transmitter, the
refl ecting of signals off obstacles (mountains,
hills, tower blocks) and radio blackspots (no
coverage from the station transmitter).
SELECTION OF FREQUENCIES AND
By repeated presses on button
NaviDrive changes successively between
the memory banks FM1, FM2 and FMast,
corresponding to FM frequencies, and to
the memory bank MW/LW, corresponding
A short press on one of the buttons
will respectively increase or decrease the
be able to scroll through the waveband.
Scrolling stops as soon as a station is found.
NaviDrive remains tuned to the frequency
Select the waveband and memory bank
Select a station using either automatic or
Keep pressing for more than two seconds
on one of the pre-selection buttons
A window opens on the screen, the station is
memorised as it is displayed on the memory
number you have given it.
CONTEX TUAL MENU FOR RADIO
while listening to the radio
Enter the desired frequency
Activate/deactivate the RDS
Activate/deactivate the regional search
Activate/deactivate the display of
broadcast by the radio station