A short press on one of the buttons
will tune into higher or lower radio stations
respectively, within the chosen waveband.
By keeping one of the buttons
pressed, you can scroll continuously through
the waveband. The scrolling will stop at
the fi rst station it fi nds once the button is
You can also do this by means of controls
If NaviDrive did not manage to capture a
station on a frequency known to you (recep-
tion very weak), you can perform a manual
Automatic searches can be carried out
according to two levels of sensitivity :
To capture the most powerful transmit-
ters, choose the local search mode “
To capture the weakest or most distant
transmitters, choose the sensitive search
Search for a station is done fi rst in “
(local) sensitivity, then in “
To commence a search in sensitivity “
(distant) immediately , press twice in succes-
sion on one of the buttons
AUTOMATIC MEMORISATION OF TRANS-
MITTERS (AUTOSTORE FUNCTION)
In FM, if you keep pressing for more than
will automatically memorise the 6 strongest
transmitters on the FMast memory bank.
NaviDrive memorises the 6 strongest trans-
mitters by deleting the 6 previously memo-
After the memorisation, NaviDrive goes
immediately to memory 1 of the FMast
If the traffi c information function has been
activated (see RDS SYSTEM), the stations
offering this facility will be memorised
If it is unable to memorise any new sta-
tions, the system will retain the previously
If the system is unable to fi nd 6 stations,
the unfilled memor y slots will remain
SEARCHING FOR A STATION IN A
To search for a station in a sorted list, your
installation periodically updates the list of
the stations received around your vehicle.
It shows you what stations are available,
fi rst in alphabetical order, then by frequency
in ascending order if the names are not
To access this list, give a short press on
This list is updated automatically every 10
You can update this list at any time, by giv-
ing a long press on button
displayed on the multifunction screen.