CITROEN C3 Picasso 2011 - Page 57

3
55
CO
MF
O
R
T
Full
y
-folded position
) Move the corresponding front seat
forward if necessary.
) Put the rear seat in the fully back po-
sition.
) Place the head restraints in the low
position.
) Pull control A , to release the seat
back which folds easily onto the
seat cushion.
The seat fi ts into the fl oor, providing a
continuous level fl oor.
To put the seat back in position:
) Pull the seat back backwards until it
locks in place.
) Return the seat cushion to the de-
sired position.
Adj
ust
i
ng t
h
e
h
ea
d
restra
i
nts
The 1/3 - 2/3 rear seat is fi tted with head
restraints.
They have a high position (for comfort
and safety) and a low position (for rear
visibility).
They may be removed, as follows:
) pull the head restraint upwards as
far as possible,
) then, press on the lug A .
When you are carrying rear pas-
sengers, never drive with the
head restraints removed. They
must be secured in place in the
high position.
When putting back in position, take
care not to jam the seat belts.