CITROEN C3 PLURIEL - Page 177

181
CLUTCH
GEARBOX
TRANSMISSION
AL4 AUTOMATIC GEARBOX: TIGHTENING TORQUES
Tightening torques (m.daN).
A: EW7 and EW10 engines
Hydraulic block fixing.
Centre the hydraulic block, using screws (11) and (12).
Pre-tighten
(no strict order) : 0,9.
Slacken : All 7 screws.
Tighten (respect the order indicated) : 0,75.
NOTE: The screw (11) is shouldered.
B: DW10 engine
Hydraulic block fixing.
Centre the hydraulic block, using screws (11) and (12).
Pre-tighten
(no strict order) : 0,9.
Slacken : All 7 screws.
Tighten
(respect the order indicated) : 0,75.
NOTE: The screw (11) is shouldered.
(13) Fixing of selector lever position switch : 1,5 ± 0,2
(14) Oil filler plug : 2,4 ± 0,4
C3
B2CP3EFD
B2CP3EGC
AngL.-T1-page145-189-2005 9/01/06 9:22 Page 181