127
4
Driving
Increasing the programmed
speed
Decreasing the
programmed speed
Temporary acceleration/
deceleration
Temporary acceleration
Press the accelerator pedal as normal. When
the pedal is released, you return to the stored
speed.
) Using button 2 "COAST SET" :
- successive presses decrease the speed in
steps of approximately 1 mph (1.6 km/h).
- a maintained press of this button
decreases the speed progressively.
Once the speed required has been reached,
release the button, the new speed is stored.
) Using the brake pedal:
- brake to deactivate the cruise control, then
press button 2 "COAST SET" . Release to
store the new speed.
) Using button 3 "ACC RES" :
- successive presses increase the speed in
steps of approximately 1 mph (1.6 km/h).
- a maintained press of this button increases
the programmed speed progressively.
Once the speed required has been reached,
release the button, the new speed is stored.
) Using the accelerator pedal:
- accelerate to reach the speed required,
then press button 2 "COAST SET" .
Release the button to store the new speed.
Temporary deceleration
Press the brake pedal to reduce the
speed. To return to the stored speed, press
button 3 "ACC RES" .
To Next Page
Loading...
