85
3
Comfort
Rear seats
Bench seat with fixed one-piece cushion and split backrest (left hand 2/3, right hand 1/3) which can be folded individually to adapt the load space in the boot.
Folding the backrest
Repositioning the seat backrest
) Move the corresponding front seat forward
if necessary.
) Place the head restraints in the low
position (see "Rear head restraints").
) Press control 1 forwards to release the
seat backrest 2 .
) Fold the seat back 2 on to the cushion.
) Straighten the seat backrest 2 and secure it.
) Check that the red indicator, located next to
the control 1 , is no longer visible.
When repositioning the seat backrests, they
can be locked in one of two different positions,
depending on the speed in which the operation
is carried out:
- if done quickly, the backrest returns to its
original position 1 ,
- if done slowly, the backrest goes into the
vertical position 2 .
To go from position 2 to position 1 , simply
release the backrest and push it until it locks
in place.
To Next Page
Loading...
