170
Safety
"ISOFIX" mountings
Your vehicle has been approved in accordance with the latest ISOFIX regulation .
The seats, represented below, are fitted with regulation ISOFIX mountings:
- two rings A , located between the vehicle
seat back and cushion, indicated by a
marking,
- a ring B behind the seat and identified by a
marking, referred to as the Top Tether for
fixing the upper strap.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with
two latches which are secured on the two
rings A .
Some seats also have an upper strap , known
as the Top Tether, which is attached to ring B .
There are three rings for each seat:
To Next Page
Loading...
