182
Practical information
The spare wheel is installed in the boot under
the floor.
Depending on version, the spare wheel may be
a standard size steel or alloy wheel, or for some
countries it is the "space saver" type.
For access to the spare wheel, see "Access to
the tools".
Access to the spare wheel
Taking out the standard wheel
) Unscrew the central bolt A .
) Raise the spare wheel towards you from
the rear.
) Take the wheel out of the boot.
Putting the standard wheel back
in place
) Put the wheel back in its housing.
) Put the central bolt A in place in the centre
of the wheel.
) Tighten fully to retain the wheel correctly.
To Next Page
Loading...
