189
7
Practical information
Carry out the following operations for access
the bulb protective covers:
) Remove the retaining pins A .
) Remove the protective cover B .
Access to bulbs Changing direction indicator
bulbs (1)
) Turn the bulb holder a quarter of a turn to
the left and pull it out.
) Pull out the bulb and change it.
Rapid flashing of the direction indicator
warning lamp (right or left) indicates the
failure of a bulb on that side.
To reassemble, carry out these
operations in reverse order.
Amber coloured bulbs, such as the
direction indicators, must be replaced
with bulbs of identical specifications
and colour.
To Next Page
Loading...
