1
55
Monitoring
If no action is carried out within
10 seconds, the selection menu closes
automatically.
To select the mode:
) Press the " PWR/VOL " button to switch on
the audio system.
) Press the MENU button.
) Press the SEL knob to scroll through the
menus and select " RDS setting - CT ON -
CT OFF " (clock time).
) Turn the SEL knob to the left or to the right
to select "CT OFF" (manual mode)
or "CT ON" (automatic mode).
) Press the SEL knob to confirm.
The digital clock does not display
seconds.
The time setting is lost if the battery is
disconnected.
Manual adjustment
) Press the PWR/VOL button to switch on
the audio system.
) Press the MENU button.
) Press the SEL knob to run scroll through
the menus and select " Time Setting
Adjust ".
) Turn the SEL knob to select " ON " for
access to time setting.
) Press the SEL knob to confirm.
) Turn the SEL knob to adjust the time.
) Press the SEL knob to confirm.