70
Access
With the Keyless Entry and Starting system,
message appears in the instrument panel when
replacement of the battery is needed.
Changing the batteries
Do not throw the remote control
batteries away, they contain metals
which are harmful to the environment.
Take them to an approved collection
point.
Remote control key
Battery ref.: CR1620 / 3 volts.
Electronic key
Battery ref.: CR2032 / 3 volt.
) Unclip the cover using a small screwdriver at the cutout.
) Lift off the cover.
) Remove the flat battery from its location.
) Fit the new battery into its location observing the original direction of fitment.
) Clip the cover onto the casing.
To Next Page
Loading...
