CITROEN C5 2000 - Page 139

136
INJECTION
CHECKS : TURBO PRESSURE
Engines : RHY - RHZ
Procedure.
ESSENTIAL : Observe the following checking requirements :
- Engine at running temperature.
- Vehicle in running order.
- Engine at full load.
- Start the engine.
- Engage first gear and start the vehicle.
- Engage the gears up to third gear.
- Decelerate to 2000 rpm.
- Gradually accelerate.
- Check the pressure : 0.95 ± 0.05 Bar.
- Remove the tools [1] and [2].
Refit
- The sleeve.
- The collars (3).
- Tighten the collars (3).
C5FP0ACC