CHECKS : TURBO PRESSURE
Engine : 4HX
TOOL
[1] Pressure gauge for checking pressure 7073-T.A.
[2] Extension cable for taking pressure 8607-T.A
[3] Union and hose for taking pressure 8607-T.B.
[4] Adaptor for taking pressure 8607-T.C.
[5] Unions and hoses for taking pressure 4088-T
Checks.
ESSENTIAL : Respect the safety and cleanliness requirements specific to
high pressure diesel injection (HDi) engines.
Preliminary operations.
Carry out the following operations:
Remove the screw (1).
Disconnect the tube (2).
Move aside the pressure sensor (3).
Preparation of tools : in position on the vehicle.
Fit as follows :
Remove the hose (a) of tool [5], screw in its place the tool [3], remove the hose (b) of tool [5],
screw the hose (b) of tool [5] on the pressure gauge [1], screw the adaptor [4] onto the tool [5]
Connect the tube (2) of the pressure sensor (3) on the tool [4], tighten the tube (2) with a
Serflex type collar.
B1BP28DC E5AP1SUC
137
INJECTION
To Next Page
Loading...
