39
Monitoring
DS4_en_Chap01_controle-de-marche_ed03-2015
Manual test in the type 2 instrument panel central screen
This function allows you to check the status of the vehicle systems (reminder of the "activated" / "deactivated" status of the configurable functions) and
to display the alerts log.
F With the engine running, to start a manual
test, briefly press the ".../000" button on
the instrument panel.
The following information appears successively
in the instrument panel central screen:
- engine oil level indicator (see
corresponding section),
- service indicator (see corresponding
section),
- current warnings and alert messages,
if any (see corresponding section for the
warning lamp or system concerned),
This information also appears every
time the ignition is switched on
(automatic test).
- the range for the AdBlue additive and the
SCR system for BlueHDi Diesel versions,
- status of configurable functions (see the
"Multifunction screens" section).
To Next Page
Loading...
Need help?
General
