53
Monitoring
DS4_en_Chap01_controle-de-marche_ed03-2015
- the current information tab with:
● the range,
● the current fuel consumption,
● the Stop & Start time counter.
- the trip "1" tab with:
● the distance travelled,
● the average fuel consumption,
● the average speed,
for the first trip.
- the trip "2" tab with:
● the distance travelled,
● the average fuel consumption,
● the average speed,
for the second trip.
Trip zero reset
F When the trip required is displayed, press
the button on the end of the wiper stalk for
more than two seconds.
Trips "1" and "2" are independent but their use
is identical.
For example, trip "1" can be used for daily
figures, and trip "2" for monthly figures.
To Next Page
Loading...
