87
Comfor t
DS4_en_Chap03_confort_ed03-2015
Driver's seat electric
adjustments
Forwards-backwards
F Push the control forwards or rearwards to
slide the seat.
Cushion height and angle
F Tilt the rear part of the control upwards or
downwards to obtain the required height.
F Tilt the front part of the control upwards or
downwards to obtain the required angle.
Seat backrest angle
F Tilt the control forwards or rearwards to
adjust the angle of the seat backrest.
The electrical functions of the driver's seat are deactivated approximately one minute after
the ignition is switched off.
To reactivate them, switch on the ignition.
Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat, so as to avoid the risk of of jamming
the seat caused by the presence of objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement immediately.
To Next Page
Loading...
