System for selection and control of
the various front and rear wiping
modes for the elimination of rain and
cleaning.
The vehicle's front and rear wipers
are designed to improve the driver's
visibility progressively according to
the climatic conditions.
Programming
Various automatic wiper control
modes are also available according
to the following options:
- automatic wiping for the wind-
screen wipers,
- rear wiping on engaging reverse
gear.
Manual controls
The wiper commands are issued di-
rectly by the driver by means of the
stalk A and the ring B .
R e a r w i p e r
B. rear wiper selection ring:
park,
intermittent wipe,
wash-wipe (set duration).
fast (heavy rain),
normal (moderate rain),
intermittent (proportional to
the speed of the vehicle),
automatic, then
single wipe (see
next page).
park,
single wipe (press down-
wards),
Windscreen wipers
A. wiping speed selection stalk:
o r
If a signifi cant accumulation of snow
or ice is present, or when using a
tailgate bicycle carrier, deactivate
the automatic rear wiper via the
multifunction screen confi guration
menu.
To Next Page
Loading...
