Your vehicle has been approved in
accordance with the new ISOFIX
regulation .
The three second row seats are fi tted
with regulation ISOFIX mountings.
These are three rings for each seat:
- two rings A , located between the
vehicle seat back and cushion,
indicated by a label,
- a ring B , used to fi x the upper
strap, referred to as the TOP
TETHER , indicated by a label
on a cover at the top of the seat
back.
This ISOFIX mounting system
gua-rantees you fast, reliable and
safe fi tting of the child seat in your
vehicle.
The incorrect installation of a child
seat in a vehicle compromises the
child's protection in the event of an
accident.
For information regarding the
ISOFIX child seats which can be
installed in your vehicle, consult
the summary table for the location
of the ISOFIX child seats.
The ISOFIX child seats are fi tted
with two locks which are secured
easily on the two rings A .
Some also have an upper strap
which is attached to the ring B .
To attach this strap, remove the
vehicle seat's head restraint and the
cover at the top of the seat back.
Then fi x the hook on the ring B and
tighten the upper strap.
To Next Page
Loading...
