This enables you to maximise the
vehicle’s loadspace.
It retains objects, preventing them
from sliding towards the front of the
passenger compartment.
You insert it under the roller of the
luggage-cover blind, securing it
on the third-row side mouldings.
Position 1
5-seat confi guration; installed behind
the second row.
Installing the roller
Remove the protective covers
located under the blind roller
notches.
Position the roller under that of
the luggage-cover blind.
Raise the fl ap on the blind, posi-
tioning it on top of the blind.
Deploy the net, passing it be-
tween the rollers and the seats.
Pull the net upwards.
Anchor it to the roof by means of
the fi xing points (after you have
removed their covers).
Removing the roller
Perform these operations in
reverse order.
Position 2
2-seat confi guration; installed behind
the fi rst row.
Removing the roller
Carry out these operations in
reverse order.
Installing the roller
With the second-row seats folded
away, remove the covers of the
Isofi x anchoring points located on
the seat backrests.
Secure the roller on the Isofi x
anchoring points.
Deploy the net and pull it upwards.
Anchor it to the roof by means of
the fi xing points (after you have
removed their covers).
To Next Page
Loading...
