Automatic gearbox which offers a
choice between the ease of fully
automatic operation or the driving
pleasure of manual gear changing.
Therefore, you have a choice of two
driving modes:
- automatic operation for elec-
tronic control of the gears by the
gearbox,
- manual operation for sequen-
tial changing of the gears by the
driver.
automatic mode: selector 1 in
position D ,
sequential mode: selector 1 in
position M .
The position of the selector is dis-
played on the instrument panel, on
the left on multifunction screens A
and C , on the right on the NaviDrive
multifunction screen.
A position grille relating to the selec-
tor allows you to view the position
that is selected.
For safety:
- position P can be disen-
gaged only if you press
the brake pedal,
- when a door is opened, a sound
signal is heard if the selector is
not in position P ,
- always make sure that the se-
lector is in position P before
you leave your vehicle.
If the gearbox is in position P but
the position of the selector is differ-
ent, reposition the selector on P so
that you can start the vehicle.
Never press the brake and acelera-
tor pedals simultaneously. Braking
and acceleration should be done
only with the right foot. Pressing both
pedals simultaneously introduces a
risk of damage to the gearbox.
Displays on the instrument panel
Multifunction screen A or C NaviDrive multifunction
screen
Mode selection
To Next Page
Loading...
