PRACTICAL INFORMATION
R e a r l a m p s ( C 4 P i c a s s o )
1. Direction indicators
(PY 21 W)
2. Stoplamps/sidelamps
(P21/5 W)
3. Reversing lamp (P21 W )
Identify the faulty bulb.
With the boot open, press on the
plastic cover A , located close
to the lens, to release it from its
housing.
Undo the two screws B on the
side of the lens and detach the
lamp by pulling it rearwards.
Disconnect the connector linking
the lens unit with the tailgate.
Remove the bulb-holder.
Replace the bulbs.
To remove a bulb, rotate it a
quarter turn.
To refi t the bulb, rotate it a quarter
turn in the other direction.
Reposition the bulb-holder.
Reconnect the connector to the
lens unit.
Lamps mounted on the
bodywork
Identify the faulty bulb.
With the boot open, remove the
plastic cover on the tailgate.
Remove the bulb-holder from its
housing.
Replace the bulb.
To remove a bulb, rotate it a
quarter turn.
To refi t the bulb, rotate it a quarter
turn in the other direction.
Reposition the bulb-holder.
Refi t the plastic cover.
Lamps mounted on the tailgate
Refi t the lamp unit on the body
and do up the two screws.
Reposition the plastic cover by
pressing on it.
To Next Page
Loading...
