MULTIFUNCTION SCREENS
Personalisation -
Configuration
This permits activation/deactivation
of certain functions which may be
present or not depending on the trim
level of your vehicle:
- operation of the rear wiper,
- automatic guide-me-home lighting,
- directional headlamps,
- electric parking brake automatic
functions (application/release) (de-
pending on destination country)
- door selectivity,
- lighting of daytime-running lamps
(depending on country),
- rear parking assistance,
and setting of the:
- brightness intensity, time, date
and units,
- screen language.
Activating/deactivating
rear screen wipe when you
engage reverse gear
Press on A .
Use B to select "Personalisation-
Confi guration", then confi rm your
choice with a press on C .
Then select "Defi ne vehicle pa-
rameters". Confi rm your choice
with a press on C .
Using B , select "Parking assist-
ance". Confi rm your choice with
a press on C .
Then by pressing C , select/
deselect "Activation of rear wiper
in reverse gear" to activate/de-
activate this.
Confi rm with "OK" on the screen.
Activating/deactivating
automatic guide-me-home
lighting
Press on A .
Use B to select "Personalisation-
Confi guration", then confi rm your
choice with a press on C .
Then select "Defi ne vehicle pa-
rameters". Confi rm your choice
with a press on C .
Using B , select "Lighting and
signalling". Confi rm your choice
with a press on C .
Then by pressing C , select/dese-
lect "Guide-me-home headlamps"
to activate/deactivate this. After
activation, choose its duration:
press on C , then use B to select
the duration and then press on C .
Confi rm with "OK" on the screen.
Activating/deactivating
Xenon dual-function
directional headlamps
Press on A .
Use B to select "Personalisation-
Confi guration", then confi rm your
choice with a press on C .
Then select "Defi ne vehicle pa-
rameters". Confi rm your choice
with a press on C .
Using B , select "Driving assist-
ance". Confi rm your choice with
a press on C .
Then by pressing C , select/dese-
lect "Directional headlamps" to
activate/deactivate them.
Confi rm with "OK" on the screen.
To Next Page
Loading...
