JUMPY-ATLANTE-VP_EN_CHAP04_SECURITE_ED01-2014
(a) Universal child seat: child seat that can
be installed in any vehicle using the seat
belt.
(b) Group 0: from birth to 10 kg. Infant car
seats and "car cots" cannot be installed
on the front passenger seat.
(c) Consult the legislation in force in your
country before installing your child on
this seat.
(d) When a "rearward facing" child seat is
installed on the front passenger seat,
the front passenger airbag must be
deactivated. Otherwise the child risks
being seriously injured or even killed if
the airbag is deployed.
When a"forward facing" child seat is
installed on the front passenger seat,
the front passenger airbag must remain
active.
Remove and stow the head restraint
before installing a child seat with
backrest on a passenger seat.
Refit the head restraint once the child seat
has been removed.
U: seat suitable for the installation of a
child seat secured using a seat belt and
universally approved, "rearward facing"
and/or "forward facing".
L-: only the child seats indicated can
be installed in the seat in question
(depending on country of sale).
(e) To install a child seat on a rear seat,
move the seats in front forward, then
straighten the backrest to allow enough
space for the child seat and the child's
legs.
(f) To install a child seat on a rear seat,
adjust the rear seat to the fully back
position with the backrest straightened.
To Next Page
Loading...
Need help?
General
