08
13
JUMPY-ATLANTE-VP_EN_CHAP09C_RD45_ED01_2014
Each press of the button, located at the end of the
wiper stalk, displays the different trip computer
information in succession, depending on the screen.
- the "vehicle" tab with:
● the range, the current fuel consumption and the distance remaining
- the "1" tab (trip 1) with:
● the average speed, the average consumption and the distance
travelled calculated over trip
- the "2" tab (trip 2) with the same information for a second trip.
displays the distance which can travelled with the remaining fuel
detected in the tank, basd on the average consumption over the last few
This displayed value may vary signifi cantly following a change in the
vehicle speed or the relief of the route.
When the range falls below 20 miles (30 km), dashes are displayed.
After fi lling with at least 10 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km).
If, whilst driving, dashes are displayed continuously in place of the digits,
contact a CITROËN dealer.
If, whilst driving, dashes are displayed continuously in place of the digits,
contact a CITROËN dealer.
If, whilst driving, dashes are displayed continuously in place of the digits,
Current fuel consumption:
only calculated and displayed above
Average fuel consumption:
this is the average fuel consumption since
the last trip computer zero reset.
calculated since the last trip computer zero reset.
Distance remaining to the destination:
calculated with reference
to the fi nal destination, entered by the user. If guidance is activated,
the navigation system calculates it as a current value.
this is the average speed calculated since the last trip
computer zero reset (ignition on).
When the required trip is displayed, press the control for more than
To Next Page
Loading...
Need help?
General
