Intro 10
Example 1. Index unit for rotary table automatic machine
• When A and B process programs are created, and selected each
time, two types of workpieces are machined by one system.
(Merits of direct drive actuator)
• An absolute resolver eliminates the need for an origin detection
sensor.
• Equal division programs are input easily from the interactive
terminal.
• The program is created by inputting the number of divisions (or
angles) and movement time (or maximum speed), etc.
Example 2. axis for P&P unit
• By passing wiring and piping through the center hole, the system is
used as an intelligent P&P unit.
(Merit of ABSODEX)
• With the absolute resolver, return to origin is not required after turning
power on, and any position is moved to directly.
* Check when installing the mechanism.
Refer to precautions [design and selection] on page Intro 14.
A
B
B
B
B
A
A
A
Pneumatic cylinder
Air blow
Inspection equipment
Example 3. Small parts inspection
• When the middle hole is used, this is suitable for a system that removes
workpieces using forced air.
Applications
AX
Series
Example 4. Large panel-turning transport
• Suitable for applications that turn and transport large panels.
Note: If the allowable load moment of inertia exceeds specifications,
use may be possible by adjusting parameters, etc. Consult with
CKD for details.
To Next Page
Loading...
