22
AX1000
AX1000
Series
How to order
AX1000
Actuator
Size
(max. torque)
Model no.
Model Model no. of options
A
Driver type
Note 1
B
Dowel hole
H
Mounting base
C
Cable change
Note 3
E
Driver power voltage
Note 1
F
CE marking
Note 2
G
Connector installation
attitude
Note 2
D
How to order
AX1
A
Size (max. torque)
Symbol
Descriptions
022
045
075
150
210
22 N·m
45 N·m
75 N·m
150 N·m
210 N·m
B
Driver type
S
H
S type driver
H type driver
C
Mounting base
Blank
B
Standard (without mounting base)
With blackening mounting base
D
Connector installation attitude
Blank
C
Standard (connector horizontal installation)
Connector bottom installation
E
Cable change
Blank
D**
DM**
Standard (cable length 4 m)
Cable length change
Flexible cable length change
G
CE marking
Blank
K
Standard (CE marking not available)
CE marking
H
Dowel hole
Blank
P1
Standard (without dowel hole)
1 on top
F
Driver power voltage
Refer to the driver - power voltage table on the left.
** cable length
Note: The length and type cannot be changed after delivery.
02
Blank
06
08
10
15
20
25
30
2 m
4 m
6 m
8 m
10 m
15 m
20 m
25 m
30 m
Flexible cable 4 m: DM
D08022 S B J1 P1C K
Note on model no. selection
Note 1: Select the driver according to the table below.
Model
Driver - power voltage table
Driver
type
S type driver H type driver
200 to 230 VAC 100 to 115 VAC 200 to 230 VAC 100 to 115 VAC
AX1022
AX1045
AX1075
AX1150
AX1210
Blank
Blank
Blank
J1
J1
Blank
Blank
[Note]
Use the noise filter for the
motor cable if the cable is
longer than 6 m.
* S type driver is recommended if the max. torque is 75 N·m or less.
Contact CKD for details on the availability of the H type driver.
Note 2: Connector bottom installation (-C) and CE marking product (-K) can not be selected same time.
Note 3: Use the optional flexible cable in applications where the cable is bent repeatedly.
Refer to page 57 for dimensions of the cable.
To Next Page
Loading...
