34
AX4000
Series
How to order
AX4000
Actuator
Model no.
Size
(max. torque)
A
Driver type
Note 1
B
Cable change
Note 2
D
Mounting base
Note 3, 4, 5
C
Driver power voltage
Note 1
F
Dowel hole
Note 4, Note 6
H
Body surface treatment
I
CE marking
G
Brake
Note 5
E
How to order
AX4
A
Size (max. torque)
Symbol
Descriptions
009
022
045
075
150
300
500
9 N·m
22 N·m
45 N·m
75 N·m
150 N·m
300 N·m
500 N·m
B
Driver type
S
H
S type driver
H type driver
C
Mounting base
Blank
B
BS
Standard (without mounting base)
With blackening mounting base
Electroless nickel plating, surface treatment mounting base
Use with body surface treatment S.
D
Cable change
Blank
D**
DM**
Standard (cable length 4 m)
Cable length change
Flexible cable length change
G
CE marking
Blank
K
AX4009
Mounting base (-B)
Mounting base (-BS)
Brake (-EB)
X
X
X
AX4022 AX4045 AX4075 AX4150 AX4300 AX4500
X
Standard (CE marking not available)
CE marking
H
Dowel hole
Blank
P1
P2
P3
Standard (without dowel hole)
1 on top
1 on bottom (2 on bottom for AX4009)
1 each on both top and bottom
I
Body surface treatment
Blank
S
Standard (rotational section - blackening, fixing section casting surface plane - paint)
Rotational section - electroless nickel plating treatment, fixing section - nitriding
E
Brake
Blank
EB
Standard (without brake)
With negative actuation type electromagnetic brake
(AX4009 and AX4500 cannot be selected)
022 S P1DM08 J1EBBS SK
Note on model no. selection
Note 1: Select the driver according to the table below.
Note 6: Additionally machined sections may not have a treated surface.
Model
Driver - power voltage table
Option table
Driver
type
S type driver H type driver
200 to 230 VAC 200 to 230 VAC100 to 115 VAC
AX4009
AX4022
AX4045
AX4075
AX4150
AX4300
AX4500
Blank
Blank
Blank
Blank
J1
J1
J1
100 to 115 VAC
Blank
Blank
Blank
F
Driver power voltage
Refer to the driver - power voltage table on the left.
Model Model no. of options
** cable length
Note: The length and type cannot be changed after delivery.
02
Blank
06
08
10
15
20
25
30
2 m
4 m
6 m
8 m
10 m
15 m
20 m
25 m
30 m
Flexible cable 4 m: DM
(1 on top/2 on
bottom for AX4009)
[Note]
Use the noise filter for the
motor cable if the cable is
longer than 6 m.
Note 2: Use the optional flexible cable in applications where the cable is bent repeatedly.
Refer to page 57 for dimensions of the cable.
Note 3:
Designate body surface treatment and mounting base surface treatment with (C) and (I).
Note 4: "P2" and "P3" cannot be selected if "B" with blackening mounting base or "BS"
electroless nickel plating surface treatment mounting base is designated for (C)
mounting base.
Note 5: Refer to the Option Table below and select required options.
* S type driver is recommended if the max. torque is 75 N·m or less.
Contact CKD for details on the availability of the H type driver.
To Next Page
Loading...
