52
AX8000
Series
How to order
AX8000
Actuator
Size
(max. torque)
Model no.
A
Driver type
Note 1
B
Cable change
Note 2, Note 3
C
Driver power voltage
Note 1
D
Dial plate shape
Note 4
E
How to order
AX8
A
Size (max. torque)
Symbol
Descriptions
045
070
45 N·m
70 N·m
B
Driver type
S S type driver
C
Cable change
Blank
D**
D**L
DM**
DM** L
Standard (water proof straight plug 4m)
Water proof straight plug
Cable length change
Water proof angle plug
Cable length change
Water proof straight plug
Flexible cable cable length change
Water proof angle plug
Flexible cable cable length change
E
Dial plate shape
Blank
P
T
Flange table
Flange table with dowel hole
T slot table
DM08L045 J1 PS
Note on model no. selection
Note 1: Select the driver according to the table below.
Note 4: "P" and "T" can not be selected together.
Straight plug Angle plug
Model
Driver - power voltage table
Driver
type
S type driver H type driver
200 to 230 VAC 100 to 115 VAC200 to 230 VAC
100 VAC
AX8045
AX8070
Blank
Blank
J1
** cable length
Note: The length and type cannot be changed after delivery.
02
Blank
06
08
10
15
20
25
30
2 m
4 m
6 m
8 m
10 m
15 m
20 m
25 m
30 m
Flexible cable 4 m: DM
F
Driver power voltage
Refer to the driver - power voltage table on the left.
Model Model no. of options
[Note]
Use the noise filter for the
motor cable if the cable is
longer than 6 m.
* S type driver is recommended if the max. torque is 70 N·m or less.
Contact CKD for details on the availability of the H type driver.
Note 2: Use the optional flexible cable in applications where the cable is bent repeatedly.
Refer to page 57 for dimensions of the cable.
Note 3: Refer to the drawing below for plug shapes.
To Next Page
Loading...
