CKD FLUEREX WFK2 Series User Manual

Supports IO-Link
IO-Link is a digital communication standard for sensors/actuators at factory sites. (IEC 61131-9)
Unlike analog communication, it enables the transmission of parameters and event data.
Cooling and temperature control of
semiconductor manufacturing equipment.
Etching, grinder, dicer, CVD.
Quantitative management of coolant. Spot welding machine coolant control and
ow rate abnormality detection for chip fallout.
Semiconductor
Semicon manufacturing
equipment
Hardening Induction hardening device
Welding Spot welding machine
Examples of applications
Features of IO-Link
Digital signal
Constant monitoring with digital data is possible.
Parameter
remote control
Parameters can be set and changed via the
network, enabling remote equipment operation.
Housing identification
Models, serial numbers, etc., can be conrmed on
the network.
Plug & Play
The settings can be copied from the master
(scanner), making parameter reconfiguration after
maintenance obsolete.
Error notification
Device failure and disconnection can be conrmed.
Connection to fieldbus
It can also be converted to Ethernet networks and
connected, enabling devices to be IoT-ready.
IO-Link
Master
Constant monitoring
Alarm notification
Housing identification
Parameter change
Ethernet
Cloud
Plant
Production site
PLC
I/O
TM
Contact CKD for support of food manufacturing processes FP series.
Control equipment
Communication
I/O
unit
A/D
conversion
unit
Monitor (flow rate display)
Detects abnormalities
Controls peripheral
components
Flow rate measurement data
Water temperature measurement data
Recorder
Solenoid
valve
Air operated valve
Water
Air
PLC
I/O unit
Input
terminal
Output
terminal
Detects abnormal
flow rates
Controls solenoid valve
Controls solenoid valve
Detects abnormal flow rates
Solenoid valve
PLC
I/O unit
Input
terminal
Output
terminal

CKD FLUEREX WFK2 Series Specifications

General

Brand	CKD
Model	FLUEREX WFK2 Series
Category	Accessories
Language	English