Need help?Do you have a question about the CKD PPX-R10N-6M-KA and is the answer not in the manual?
General| Brand | CKD |
|---|---|
| Model | PPX-R10N-6M-KA |
| Category | Accessories |
| Language | English |
Digital display is wider and easier to see, with wider pressure range and set pressure range.
High function type supports analog voltage, analog current, or external input selection.
14% reduction in normal operation and up to 50% reduction in ECO MODE.
Details on current value, set value, display sections, and mode switchover keys.
Enables copying settings to reduce setup time and prevent errors.
Clear alphanumeric display for easy reading and operation.
Displays the maximum and minimum values of variable pressure.
Applications for positive and vacuum pressure confirmation or interlock.
Demonstrates easy setting with auto reference/remote zero adjusting.
Shows control of vacuum and burst pressure with a single unit.
Illustrates contact confirmation scenarios.
Explains the ordering format for domestic customers using symbols.
Explains the ordering format for international customers, including unit change.
Details available option model numbers like cable types and brackets.
Detailed dimensional drawings for models with R/NPT thread.
Detailed dimensional drawings for models with G thread.
Installation and dimensional details for the PPX-KL sensor bracket.
Installation drawings for panel brackets and front covers.
Specifies dimensions for panel cutouts for single and multiple installations.
Installation drawing and dimensions for the front protective cover.
Details on cable lengths, weights, and connector pin assignments.
Information on the connector set components and housing.
Wiring diagrams for NPN output types (Standard and High function).
Wiring diagrams for PNP output types (Standard and High function).
Illustrates connection examples for external input signals.
General description and key features of the oil-prohibited type.
How to order and technical specifications for the oil-prohibited model.
Dimensional information for the oil-prohibited type.
Sets comparison output on or off with simple logic.
Manages comparison output on/off using hysteresis settings.
Controls output based on pressure being within a set range.
How to set threshold values for comparison outputs in different modes.
Forcibly sets the pressure display to zero.
Disables key operations to prevent accidental changes.
Displays the maximum and minimum pressure values.
Configure comparison output 1 and 2 modes (EASY, Hysteresis, Window).
Set output as Normally Open (N.O.) or Normally Close (N.C.).
Adjust the sensor's response time from 2.5ms to 5,000ms.
Configure main display color and switch pressure units.
Customize the content displayed in the sub-display section.
Adjust display speed and fixed hysteresis values.
Configure ECO mode and check current setting details.
Manage setting copies and reset configurations.
Step-by-step guide to copy settings between sensors.
Corrects detection pressure as reference for auto reference input.
Describes available setting ranges and corrections after auto reference.
Charts showing output behavior with N.O. setting and auto reference input.
Charts illustrating remote zero adjusting for high function type.
Step-by-step setting for suction confirmation in EASY MODE.
Setting example for combined suction and vacuum break confirmation.
Setting example for suction confirmation using Hysteresis Mode.
Setting example for combined confirmation in Hysteresis Mode.
Setting example for source pressure confirmation in Window Comparator Mode.
Important safety information, warnings, and precautions before use.
Covers warranty period, scope, and compatibility.
Guidelines for product usage, gas types, and environment.
Conditions required for CE marking compliance.
Countermeasures to prevent malfunction caused by noise.
Instructions for connecting pipes, including torque and seal tape.
Warnings for sensor bracket installation and tightening torque.
Steps for connecting and disconnecting the sensor's connector.
Cable specifications, wiring, and power supply requirements.
Guidelines for piping, impact avoidance, and connection methods.
Measures against overcurrent and surge current from inductive loads.
Methods to prevent damage from reverse current.
Details on EVR series vacuum regulators, accuracy, and functions.
Features of RPE series precision regulators, focusing on efficiency.
Information on RP series regulators for pressure control and balancing.
To Next Page
