CKD INDEXMAN PPLX Series - Page 10

[SMB-20E]
― 9
―
ADEQUATE
OPERATION
４
2) Adequate operation
(1) Keep the load mass (carrying mass) below the dynamic rated carrying mass.
(2) Input shaft revolving speed
Use the r. p. m. of input shaft within the specifications.
！
 WARNING:
Use the product within the range of specifications. A load and/or
r.p.m. exceeding the specifications may result in a damage, a
malfunctionand/oraccuracydeteriorationofthePickandPlaceunit.
！
 WARNING:
Don'ttouchanymovingpartduringtheoperationofthePickand
Placeunit.
 CAUTION:
！
StartandstopthePickandPlaceunitatadwellsection.Astartor
stopotherthanthedwellsectionwillcausetheoverload.Thismay
resultinadamageoftheunit.