CKD INDEXMAN PPLX Series - Page 17

[SMB-20E]
― 16 ―
PRODUCT
SPECIFICATIONS
８
PPLX040typeB(tabletype)
Item
Characteristic
value
Item
Characteristic
value
Stroke La mm max.80 Permissible thrust force of input shaft N 800
Stroke Lb mm max.30 Permissible radial force of input shaft N 750
Mass inside stroke La (moa) kg 0.6 Moment of inertia of input shaft kgm
2
2.7×10
-4
Mass inside stroke Lb (mob) kg 1.2 Internal frictional torque (Tin) Nm 1.9
Body mass kg 10 Repeated accuracy mm ±0.02
Lubrication method
Lubrication by
grease
Paint color Silver
PPLX050typeB(tabletype)
Item
Characteristic
value
Item
Characteristic
value
Stroke La mm max.100 Permissible thrust force of input shaft N 1200
Stroke Lb mm max.40 Permissible radial force of input shaft N 900
Mass inside stroke La (moa) kg 1.1 Moment of inertia of input shaft kgm
2
7.3×10
-4
Mass inside stroke Lb (mob) kg 2.3 Internal frictional torque (Tin) Nm 3.0
Body mass kg 15 Repeated accuracy mm ±0.02
Lubrication method
Lubrication by
grease
Paint color Silver
PPLX063typeB(tabletype)
Item
Characteristic
value
Item
Characteristic
value
Stroke La mm max.150 Permissible thrust force of input shaft N 2000
Stroke Lb mm max.50 Permissible radial force of input shaft N 1600
Mass inside stroke La (moa) kg 1.8 Moment of inertia of input shaft kgm
2
2.4×10
-4
Mass inside stroke Lb (mob) kg 3.8 Internal frictional torque (Tin) Nm 4.8
Body mass kg 25 Repeated accuracy mm ±0.02
Lubrication method
Lubrication by
grease
Paint color Silver
PPLX080typeB(tabletype)
Item
Characteristic
value
Item
Characteristic
value
Stroke La mm max.200 Permissible thrust force of input shaft N 2500
Stroke Lb mm max.60 Permissible radial force of input shaft N 270
Mass inside stroke La (moa) kg 3.6 Moment of inertia of input shaft kgm
2
8.6×10
-4
Mass inside stroke Lb (mob) kg 6.9 Internal frictional torque (Tin) Nm 7.8
Body mass kg 50 Repeated accuracy mm ±0.02
Lubrication method
Lubrication by
grease
Paint color Silver
3) Others
 For the dynamic rated carrying mass, see the catalog.
 Refer to catalogs for dimensions.