Need help?Do you have a question about the claber 8053 and is the answer not in the manual?
Install the 9V alkaline battery by connecting terminals and checking charge via LED.
Place the unit 70-80 cm above floor, in shade and cool place away from windows.
Arrange plant pots on the floor close to the Oasis unit, ensuring they are in saucers.
Install Oasis a few days before leaving to test operation and meet plant needs.
Only operate the Oasis system using 9V alkaline batteries.
Do not add liquid fertilisers to the tank; apply directly to soil if needed.
Use only clean water in the Oasis system; avoid other liquids or chemicals.
Check battery is flat or connections are incorrect if the LED does not illuminate.
Check drippers for blockages, kinks in hose, correct unit height, or air bubbles.
Ensure hose lengths from tank touch floor before connecting to first drippers for proper start.
Step-by-step guide to expel air from the circuit by sealing hose ends and managing water flow.
General| Model | 8053 |
|---|---|
| Brand | Claber |
| Material | Plastic |
| Connection Size | 3/4 inch |
| Power Source | Battery |
| Battery Life | Up to 1 year |
| Type | Irrigation Timer |
| Color | Green |
| Watering Duration | 1 min to 120 min |
| Watering Frequency | Every 6, 12, 24, 48, 72 hours |
| Inlet Connection | 3/4 inch BSP |
| Outlet Connection | 3/4 inch |
| Number of Programs | 15 pre-set programs |
To Next Page
