Need help?Do you have a question about the Clack CAP 1248 and is the answer not in the manual?
General| Model | CAP1248 |
|---|---|
| Operating Pressure | 20-125 psi |
| Operating Temperature | 40-110° F |
| Inlet/Outlet | 1" NPT |
| Brine Line | 3/8" |
Electrical requirements and connection details for the filter valve.
Mechanical aspects of assembly, including pipework and connections.
Detailed steps to commission the filter unit after installation, including checks and manual regen.
Troubleshooting steps for issues related to no water flow during service.
Troubleshooting steps for poor water quality, including backwash adjustments.
Troubleshooting steps for the backwash function not operating correctly.
To Next Page
