Clam Quick-Set 114628 - User Manual

Part #s: 114628
Center Height: 82 inches
Foot Print: 96" x 168"
Hub-to-Hub: 100 x 170 inches
Weight: 50 lbs
Instruction #: 106339
Please contact customer service directly at the E-mail or phone number listed below for any
quality issues. ONCE USED THIS PRODUCT CANNOT BE RETURNED TO STORE.
** Warranty cannot be honored without an original, dated receipt. **
Customer Service Hours: Monday – Friday 9am – 4pm Central Standard Time
Phone: 763-231-4120
Email: CustomerService@ClamCorp.com
IMPORTANT! Please read: This product is warrantied to the original retail purchaser (not transferable) to be free from
manufacturer’s defects for one (1) year from the date of the original purchase. Warranty does not cover screen tears,
tent tears, or broken or bent poles due to high wind, weather conditions or unattended use. The part will be replaced or
repaired (manufacturer’s option) if found defective within the one (1) year time frame. Warranty will be void if product
has been subject to neglect, misuse, improper installation, misapplication, alteration, or accident including, but not
limited to, improper maintenance or use of unauthorized parts or attachments. Please read this entire owner’s manual
to ensure proper installation, use, storage and care for your Clam shelter.
To submit a warranty request, please use one of the following methods:
 Preferred Method - Visit www.QuickSetShelters.com under the “Customer Support” tab fill out the warranty
form.
 Email: CustomerService@ClamCorp.com
 Write: Clam Outdoors - Warranty Department
o 12135 Brockton Lane N.
o Rogers, MN 55369
Information needed to submit a warranty claim: Please include your full name, address, phone number, a copy of your
receipt, a brief description of the problem, and pictures to clearly show the area(s) of concern. Clam’s warranty
department will review your request and a Clam representative will contact you regarding your claim status. If
instructed by the warranty department, all returns must be returned with postage prepaid.
It is expressly understood that Clam Corporation’s liability for its products, whether due to breach of warranty,
negligence, strict liability, or otherwise, is limited to the repair of the product as stated above. Clam Corporation is not
liable for any injury, loss, damage, or expense, whether direct or consequential, including but not limited to loss of use,
income, profit, or damage to material arising in connection with the sale, installation, use of, inability to use, or the
repair or replacement of Clam Corporation products. Clam Corporation reserves the right to make alterations or
modifications in its products at any time, which in its opinion, may improve the performance and efficiency of the
product. Clam shall not be obligated to make such alterations or modifications to products already in service.
WARRANTY INFORMATION
LIMITATION OF LIABILITY
Cabin Screen Tent

Summary

Warranty Information

Product Warranty Details

One (1) year warranty against manufacturer's defects, excluding damage from misuse or weather.

Submitting a Warranty Request

Methods and required information for submitting a warranty claim, including contact details and documentation.

Limitation of Liability

Clam Corporation's liability is limited to product repair, not consequential damages or loss.

Safety Instructions

General Safety Precautions

Key safety advice includes avoiding open flames, hot surfaces, and using external anchors in high winds.

Product Flammability

Tent fabric is flame-resistant (CPAI-84) but not fireproof; it will burn if exposed to continuous flame.

Set Up Instructions

Preparation Before Setup

Recommended preparation includes watching setup videos and practicing at home before initial use.

Basic Setup Procedure

Step-by-step guide for unfolding, popping hubs, and erecting the shelter walls and roof.

Securing the Tent

Instructions on installing optional vertical rods and securing the shelter using stakes and anchor straps.

Using Built-in Wind Panels

Guide on attaching, zipping, and storing the integrated wind panels for weather protection.

Installing the Floor

Floor Installation Steps

Detailed instructions for attaching the floor tray using Velcro and toggles, and securing it to the tent.

Installing the Privacy Divider

Privacy Divider Installation

Guidance on locating, installing, and using the privacy divider panel with its barrel and hoop system.

Take Down Instructions

Shelter Disassembly

Step-by-step process for collapsing the tent, removing poles, and packing it back into the carry bag.

Safety Information

Fire Safety Warnings

Crucial warnings about fire hazards, fabric properties, and avoiding open flames or hot surfaces.

Nighttime Visibility

Advice on ensuring exterior reflectors are visible at night to reduce collision risks.

Clam Quick-Set 114628 Specifications

General

Brand	Clam
Model	Quick-Set 114628
Category	Tent
Language	English