DOC ID - 1641 • Rev 03 2 / 9
Search Active Device Protocol (SADP) Tool
Using your computer, browse to the below address and download the SADP tool.
Note: The SADP tool is only available on Windows.
www.clarecontrols.com/dealer/clarevisionplus-resources/
Creating and using a ClareVision Plus account
To access the live camera view and stream footage from anywhere in the world,
you must setup a ClareVision Plus account.
To setup the ClareVision Plus account using an iOS device:
1. Download and install the ClareVision Plus app.
ClareVision Plus for Android – Google Play
ClareVision Plus for iOS - iTunes
2. Launch the app, and then tap My Devices.
3. Tap Login.
4. Enter the homeowner’s credentials.
– or –
Tap Register. Follow the registration steps below.
Note: The ClareVision Plus account used must be that of the homeowner.
a. Tap Mobile or Email (preferred), and then read and select the
checkbox for the Terms of Service.
b. Select the country, and then tap Finish in the top-right.
Email
i. Enter the customer’s email address, and then tap Next.
ii. Retrieve the code from the email and enter it into the Security
Code field.
iii. Tap Next
Mobile
i. Enter the customer’s mobile number, and then tap in the
Mobile Phone Number field.
ii. Tap Get Security Code.
iii. Retrieve and copy the code from the text message, and then
paste in into the Security Code field.
To Next Page
