EasyManua.ls Logo

Clarion CC-2011E - User Manual

Clarion CC-2011E
10 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CC-2 011E
Owner’s manual & Installation manual
Mode d’emploi et manuel d’installation
Bedienungs- und Montageanleitung
Manuale di istruzioni e di installazione
Gebruiksaanwijzing & Montagehandleiding
Manual de instrucciones y manual de instalación
Bruksanvisning & installationsanvisningar
Manual do utilizador & Manual de Instalação
Vehicular Rear-View Color Camera
Caméra couleur de rétrovision pour véhicule
Farbheckkamera für Fahrzeuge
Telecamera a colori per la visione posteriore
Achteruitkijk-kleurencamera voor voertuigen
Cámara en color de visión posterior para vehículos
Bakåtriktad färgkamera för fordon
Câmara a Cores Retrovisora para Veículos

Table of Contents

Questions and Answers

  • K
    Kelsey HernandezAug 12, 2025
    What to do if my Clarion CC-2011E Dash Cameras displays no image?
    • R
      Rachael TaylorAug 12, 2025
      If your Clarion Dash Camera displays no image, start by checking all wiring connections to ensure they are complete and correctly connected. If you're using an independent power supply box, inspect the fuse. If the fuse is burned out, replace it with a new one of the same capacity (1 A). If the fuse burns out repeatedly, consult your dealer or nearest Clarion Service Center.
  • G
    Grant KirbyOct 28, 2025
    Why is my Clarion Dash Camera producing a poor image?
    • J
      Jose LiOct 28, 2025
      If your Clarion Dash Camera produces a poor image, first check if the lens cover is soiled. If it is, wipe it lightly with a damp, soft cloth. Avoid rubbing harshly with dry cloths to prevent scratches. Also, sunlight or headlights shining directly into the camera can cause a poor image; the image should return to normal once the light source is removed. Additionally, very dark environments can result in a poor image, which will improve with brighter illumination. If the level of illumination outside the vehicle changed too abruptly, when using a separate power supply box, in auto mode stop the vehicle and set the transmission to neutral, then once again to reverse. In manual mode press the AUTO/MANUAL switch to set the unit to AUTO, then press once again to set to MANUAL. If the transmiss...

Summary

1. FEATURES

2. PRECAUTIONS

3. SPECIFICATIONS

Package contents

4. OPERATION

Troubleshooting

5. INSTALLATION

Before installation

Review safety warnings and ensure correct unit installation before proceeding with setup.

Precautions when using two-sided tape for installation

Guidelines for applying adhesive tape to ensure proper adhesion and longevity of the mounting.

Installing;Wiring the camera

Detailed steps for physically mounting the camera and connecting its wiring harness.

6. WIRING

Waterproof Connector Fastening Procedure and Cautions

Instructions for correctly connecting and securing waterproof connectors for reliable signal transmission.

Clarion CC-2011E Specifications

General IconGeneral
BrandClarion
ModelCC-2011E
CategoryDash Cameras
LanguageEnglish