9
5. OPERATIONS
Basic Operation
Note:
Be sure to read this chapter referring to
the chapter
“4. CONTROLS”
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume raised
to the maximum level it may cause hearing
damage. Be careful about adjusting the
volume.
¡
Turning on and off the power
Note:
y
Start the engine before using this unit.
y
Be careful about using this unit for a long time
without running the engine. If you drain the
vessel battery too far, you may not be able
to start the engine and this can reduce the
service life of the battery.
1. Start the engine.
Engine ON position
2. If the CMS4 does not automatically turn on,
Press the [
/SRC] button to turn the power
on. Press and hold it (2 sec.) to bring up the
Power Off/Display Off selection. Select Power
Off to completely power down the CMS4 unit.
Select Display Off to keep the CMS4 operating
with the display backlight off.
¡
Selecting a mode
1. Press the [ / SRC ] button to change to the
next available source.
* If a Bluetooth device is not connected to the
CMS4, it is not displayed.
¡
Adjusting the volume
1. Rotate [ VOL ] knob clock-wise to increase
the volume.
2. Rotate [ VOL ] knob counter clock-wise to
decrease the volume.
CAUTION
While boating, please be aware of the volume
levels in residential, family areas and local
volume level ordinances.
¡
Mute
Press the [ VOL ] button to turn the Mute On
and Off.
¡
Power Off / Display Off
This feature will allow the user to Power Off the unit
or to turn the Display OFF in the event the display is
too bright for current lighting conditions.
y
Power Off – Select to turn off the unit
y
Display Off – Select to turn off the backlight of
the display, but the button and knob illumination
will remain until a button or knob action occurs.
To Next Page
Loading...
Need help?
General