280-7815-00
DB625MP 15
Theft Deterrent Faceplate
The faceplate of the unit can be detached and
taken with you, helping to deter theft.
●
Removing the Faceplate
1. Press the [OPEN] button.
Drop open the faceplate.
2. Drawing the faceplate to left side pull it to the
front and remove it.
Notes:
• The faceplate is a precision piece of equipment
and can be damaged by shocks or jolts. For that
reason, keep the faceplate in its special storage
case while detached.
• Do not expose the faceplate or its storage case to
direct sunlight or excessive heat or humidity. Also
avoid places with too much dust or the possibility
of water splashing.
Basic Operations
●
Reattaching the Faceplate
1. Align the shaft on the unit with the depression
on the faceplate.
2. Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you
to use the unit.
280-7815-00_009-030 (En) 4/2/02, 4:58 PM15
To Next Page
Loading...
Need help?
General
