Clarion DRX6575RZ - Sound Customization; Z-enhancer and Tone Adjustments; Loudness Effect

Setting the Z-enhancer
This unit comes with 3 types of sound tone effects
stored in memory. Select the one you prefer.
* The factory default setting is “OFF”.
Each time you press Z-EHCR button{[8], the tone
effect changes in the following order:
“Z-ENHANCER 1” + “Z-ENHANCER 2” ‘Z-
ENHANCER 3” > “OFF” - “Z-ENHANCER 1”...
° Z-ENHANCER 1 : bass emphasized
° Z-ENHANCER 2: treble emphasized
° Z-ENHANCER 3: bass and treble emphasized
e OFF : no sound effect
Adjusting the tone
Press A-M button [13] and select the item to adjust.
Each time you press A-M button [13], the item
changes in the following order:
© When Z-enhancer 1,2 or 3 is set
“Z-EHCR” = “BAL” = “FAD” + Function
mode...
Adjusting the bass
1. Press A-M button [13] and select “BASS”.
2. Turning the Rotary knob [5] clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
* The factory default setting is “0”. (Adjustment
range: —6 to +6)
3. When the adjustment is complete, press A-M
button [13] several times until the function mode
is reached.
Adjusting the treble
1. Press A-M button and select “TREB”.
2. Turning the Rotary knob [15] clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
* The factory default setting is “0”. (Adjustment
range: —6 to +6)
3. When the adjustment is complete, press A-M
button [13] several times until the function mode
is reachedl.
Adjusting the balance
1. Press A-M button [13] and select “BAL.
2. Turning the Rotary knob [15] clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
Basic Operations
* The factory default setting is “0”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press A-M
button [13] several times until the function mode
is reached.
Adjusting the fader
1. Press A-M button [13] and select “FAD”.
2. Turning the Rotary knob [15] clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
* The factory default setting is “0”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press A-M
button [13] several times until the function mode
is reached.
Adjusting the Z-enhancer
1. Press Z-EHCR button [8] and select the Z-
enhancer mode (1 to 3) to adjust.
2. Press A-M button [13] and select “Z-EHCR”.
3. Turning the Rotary knob [15] clockwise adjusts
in the + direction; turning it counterclockwise
adjusts in the — direction.
* When Z-enhancer 1 is selected, you can adjust
the bass in the range of +2.
* When Z-enhancer 2 is selected, you can adjust
the treble in the range of +2.
* When Z-enhancer 3 is selected, you can adjust
the bass and treble in the range of +2.
4. When the adjustment is complete, press A-M
button [13] several times until the function mode
is reached.
Turning on/off the loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect.
1. Press and hold LD button for 1 second or
longer to turn on the loudness effect. When
the loudness effect is turned on, “LD” lights in
the display.
2. Press and hold LD button for 1 second or
longer to turn off the loudness effect. “LD”
goes off in the display.
DRX6575Rz 11