Clarion DRX6575RZ - Radio Reception and Tuning; Basic Radio Listening; Seek Tuning Modes

Basic Operations
CT (Clock Time) function
The CT function receives CT data sent from an
RDS station and displays the time. Press DISP
button [10] to switch to CT display.
+ |f CT is not being received, “CT--— : -—" appears
in the display.
Note:
° CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
12 DRX6575Rz
Radio Operations
Listening to the radio
1. Press FNC button and select the radio
mode. The frequency or PS appears in the
display.
* PS: Programme service name
2. Press BND button [12] and select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order:
FEM1 = FM2 + FM3 = AM (MW/LW) > FM...
3. Press the right or left side of SEARCH button
to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receivable
broadcast stations; LOCAL SEEK can tune in to
only broadcast stations with a good reception
sensitivity.
1. Press BND button [12 and select the desired
band (FM or AM (MW, LW)).
2. Tune into a station.
* [f “MANU is lit in the display, press and hold
BND button [12] for 1 second or longer. “MANU”
in the display goes off and seek tuning is now
available.
* IF“TA is lit in the display, TP stations are auto-
matically sought.
© DX SEEK
Press the right or left side of SEARCH button
to automatically seek a station.
When the right side of SEARCH button is
pressed, the station is sought in the direction of
higher frequencies; if the left side of SEARCH
button [14] is pressed, the station is sought in the
direction of lower frequencies.
* When seek tuning starts, “DX” appears in the dis-
play.
@ LOCAL SEEK
If you press and hold the right or left side of
SEARCH button [14] for 1 second or longer, local
seek tuning is carried out. Broadcast stations with
good reception sensitivity are selected.
+ When local seeking starts, “LO” appears in the
display.