Clarion DRX6575RZ - Radio Memory and Tuning; Manual and Preset Tuning; Station Memory Functions

Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In quick tun-
ing mode, you can quickly tune the desired fre-
quencY.
1. Press BND button [12] and select the desired
band (FM or AM (MW/LW)).
* 1f “MANU” is not lit in the display, press and
hold BND button [12] for 1 second or longer.
“MANU is lit in the display and manual tuning
is now available.
2. Tune into a station.
© Quick tuning:
Press and hold the right or left side of
SEARCH button [14] for 1 second or longer to
tune in a station.
© Step tuning:
Press the right or left side of SEARCH button
to manually tune in a station.
Recalling a preset station
À total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding pre-
set button recalls the stored radio frequency au-
tomatically.
1. Press BND button and select the desired
band (FM or AM (MW/LW)).
2. Press the corresponding Preset button [9] to
recall the stored station.
* Press and hold one of Preset buttons [9] for 2
seconds or longer to store that station into
preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of Preset buttons [9] for 2
seconds or longer to store the current station
into preset memory.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
1. Press BND button [12] and select the desired
band (FM or AM (MW/LW)).
Radio Operations
2. Press and hold AS button [5] for 2 seconds or
longer. The stations with good reception are
stored automatically to the preset channels.
* |f auto store is performed in the FM bands, the
Stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in pre-
set memory in order. This function is useful when
searching for a desired station in memory.
1. Press PS button {5|.
2. When a desired station is tuned in, press PS
button [5] again to continue receiving that sta-
tion.
Note:
° Be careïul not to press and hold PS button [5] for
2 seconds or longer, otherwise the auto store func-
tion is engaged and the unit starts storing stations.
DRX6575Rz 13